Promise Technology VESS A3340S Handleiding (243 Pagina's)

Handleiding

/ 243

Je bekijkt pagina 25 van 243

Lock release lever (back le)

Determine which holes to use on rack

Install the sliding rails and place device in rack

Follow these steps to install the sliding rails in the rack system, then place the Vess A3340 onto the rails and

secure the device to the rack.

1. Determine what height to place the 2U enclosure in the rack, then place the right and left rack rails at the

same height on in the right and left rack position. Choose the mounting holes accordingly for your rack

system. Note that three holes are required on each front post, the uppermost of the three to be used

for the ange nuts to anchor the enclosure to the rack posts. Adjust the length of the mounting rails as

needed.

2. Secure the rails to the rack posts. Make sure the rack rails are properly oriented in the rack.

3. To set the rails into the rack posts and secure the rails, follow these steps:

Notice that each end of the sliding rails have a lever to

operate the lock mechanism that grips the rack post.

14

Vess A Class Storage Appliance for Video Surveillance Promise Technology

/ 243

Bekijk gratis de handleiding van Promise Technology VESS A3340S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.