Promise Technology VESS A3340S Handleiding (243 Pagina's)

Handleiding

/ 243

Je bekijkt pagina 200 van 243

189

Managing with CLIVess A3340s / Vess A3340d / Vess A3340 PoE

transit

Usage

transit [-a <action>] [-d <DaId>] [-s <SeqNo>]

transit -a start -d <DaId> -s <SeqNo> -p <PdId>

transit -a stop -d <DaId> -s <SeqNo>

transit -a pause -d <DaId> -s <SeqNo>

transit -a resume -d <DaId> -s <SeqNo>

Summary

The transit command starts, stops, pauses, and resumes a transition and monitors the progress of a

running transition.

Transition is an operation to replace a revertible spare drive currently used in a disk array with an new

physical drive, so the reveritible spare can be restored to spare drive status. The destination drive can be an

uncongured drive, a non- revertible global spare, or a non-revertible spare dedicated to the array.

During transition, the data on the revertible spare is transferred to the destination drive while the disk

array remains online. After transition, the destination drive becomes the part of the array and the revertible

spare is a spared drive once again.

Note that the destination drive must be the same media type, HDD or SSD, as the other physical drives in

the disk array.

Options

-a <action> Species the action to perform.

list (Default) Displays the running and paused transitions and their status.

start Starts a manual transition.

stop Stops a transition.

pause Pauses a transition.

resume Resumes a paused transition.

-d <DA ID> Species the id of disk array which contains the revertible spare drive.

-s <sequence Num> Species the sequence number of the revertible spare drive in the

array.

-p <PD ID> Species the physical drive ID of the destination drive.

/ 243

Bekijk gratis de handleiding van Promise Technology VESS A3340S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.