Proline 46862 handleiding
Handleiding
Je bekijkt pagina 4 van 28
4
TECHNICAL DETAILS
arm still in relation to the tool housing during the operation).
3. Having set the tool correctly, turn the crank (1) in the appropriate
direction. Ensure the wrench is well pressed to the bolt/nut.
4. Having loosened the bolt/nut, change the geared wrench (2) for
the extension (5) to loosen the fastening component quickly (see
Fig. C).
n Maintenance and cleaning
The product is maintenance free, do not disassemble it.
Maintenance and repairs must always be carried out by specialists in
an authorised service centre.
USE:
Clean the product with a dry, soft and clean cloth. Do not immerse
Put an appropriate socket (4) on the dog in front of the geared
the geared wrench in petrol or solvent as this damages the
wrench (2). Install the crank on the other wrench end (1)(see Fig.
protective grease layer in the internal mechanism of the geared
A).
wrench.
2. Place the socket on the bolt or nut to be loosened. Position the
STORAGE:
reaction arm (3) to ensure it can counteract forces created when
loosening without the risk of sliding off the support (see Fig. B).
When no longer used, the torque multiplier should be stored in the
transport case in the designed place, preventing tool damage during
PLEASE NOTE! Pay attention to the loosening direction.
A right thread shall be loosened leftwards while a left
its storage and its use by non-authorised people.
one rightwards. The reaction arm turns in the direction
MANUFACTURER:
opposite to the direction of the crank and socket wrench so before you
start the tool please ensure the arm is correctly supported on a stable
structural component nearby (in the example in figure B the reaction
arm rests on the neighbouring nut, with the mechanism keeping the
:
1.
PROFIX Sp. z o.o.,
03-228 Warszawa,
ul. Marywilska 34, POLAND
MODEL 66861 66862
Drive size 1" (25,4mm) 1" (25,4mm)
Max output torque 4800 Nm 6800 Nm
Gear 1:64 1:64
Total length 315 mm 345 mm
Weight 5,1 kg 5,8 kg
Max input torque 75 Nm 106 Nm
The policy of the PROFIX company consists in permanent improvements of the offered products and therefore the
company reserves the right to make amendments to the product specification without a prior notice. The images
included into the operation manual are only of the exemplary nature and may slightly differ from actual appearance
of the device purchased.
This instruction manual is protected by copyright. Copying it without the written consent of PROFIX Co. Ltd. is
prohibited.
Bekijk gratis de handleiding van Proline 46862, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Proline |
| Model | 46862 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6030 MB |
