Proline 46713 handleiding
Handleiding
Je bekijkt pagina 4 van 16
4
OPERATION MANUAL
CABLE PULLER: 46710, 46713, 46715
Original text translation
This instruction manual is protected by copyright. Copying it without the written consent of PROFIX Co. Ltd. is prohibited.
BEFORE USING THE TOOL CAREFULLY READ THE
INSTRUCTION MANUAL.
working cable
Keep this document for future reference.
WARNING! Read all safety warnings marked with a
symbol and all operating safety instructions.
ź Always there must be min. 3 wraps of cable an the spindle.
ź It is prohibited to wrap the working cable around objects to be pulled
(see Fig.G). Use only tested tying materials with an adequate capacity
The hand cable puller is designed to move loads along the ground. It can
to tie the loads.
be used for pulling and tensioning only.
ź While coiling the cable its coils must be parallel to each other, they
cannot cross.
1. Fixed hook
cable
2. Drum lock
3. Drum
In 46715 model the maximum permitted capacity depends on
4. Arm lock
device configuration (see technical data).
5. Working arm
6. Movable hook
7. Pulley
8. Working cable
2. TECHNICAL DATA
ź
ź
ź
ź
ź cable
ź
ź
ź drum lock (2).
The puller can be operated only by adults who have read and
ź working
understood the operation manual.
ź Lifting and lowering loads is prohibited! The working cable cannot
work in vertical position.
ź The load you pull must be protected against uncontrolled movement
ź When unused store the device in a place protected against
in all directions.
unauthorized access.
ź
Any extension of the handle is prohibited.
The personel shouldn't wear loose clothes and long hair must be
n Manufactured by:
pulled back.
PROFIX Co. Ltd,
Children and not skilled personal cannot be close the to cable puller
under the load.
1. APPLICATION
n Components (see pages 2-3)
34 Marywilska Street, 03-228 Warsaw, POLAND.
ź Before starting to work check carefully the condition of cable puller
paying special attention to (8) (cross section must be
round, without any distortion and damages see Fig.D).
Each worn cable with a diameter reduced by 10% of the rated size
must be replaced. (Use a caliper to measure it as shown in Fig. E).
ź The cannot be in contact with any sharp objects during
operation.
ź
ź While working watch the load movement and the puller at all times,
paying attention to the safety of persons staying around. No person is
allowed to stay behind any load being moved up along a sloping
surface (see Fig. G).
ź Any changes and repairing of the device can be done only by
authorised personel.
4. OPERATION
Take the device out of the box and check its condition.
Attach the fixed hook (1) to stable and solid base.
Switch the arm lock (4) into pos. 2.
Hold the drum lock (2) in pos. 2.
Pull out the (8) to required lengh.
Fasten the movable hook (6) to the cargo that is to be moved.
Switch the arm lock (4) to pos.1.
3. SAFETY RECOMENDATIONS
Unblock the
ź
Move the arm (5) up to the moment the cargo is in the
required position.
5. STORAGE AND MAINTENANCE
ź The puller cannot be overloaded above data given in technical
Cable puller must be protected against moisture. If operation was
specification and on safety labels.
held in wet conditions the cable puller must be dried and all movable
ź
parts must be oiled.
ź
ź
TYPE 46710 46713 46715
Cable
Cable
Capacity (kg)
lengh (m) 3 3 3
dia (mm) 5 5 6
Weight (kg) 2,5 3,9 7,2
Number of hooks 2 2 3
single cable
double cable
1000
1300
750
1500
Bekijk gratis de handleiding van Proline 46713, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Proline |
| Model | 46713 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3540 MB |
