Proline 07909 handleiding
Handleiding
Je bekijkt pagina 5 van 52
5
INTENDED USE:
the estimated exposure under actual operational conditions (taking into
account all parts of the operating cycle such as when the tool is switched
off or idle except the start time).
USE:
n How to charge the battery
n
Fig.A 1. Nozzle cover
2. Auxiliary light
ź Connect the small plug (microUSB) to the charging port on the device
3. Battery level indicator
(4), and the large one to the charger.
4. MicroUSB charging port
źPlug the charger in and wait a moment. The battery level indicator (3)
5. Port cover
will light up and indicate the battery level.
6. On/Off switch
n Battery charging indications
7. Pipe
The device has a battery level indicator (3), which indicates the current
8. Filter
charging status:
9. Tank
10. Liquid level, ml
źIt may take 3 to 5 hours to fully charge the battery.
Disconnect the charger when charging is complete.
IMPORTANT:
źMake sure to charge the battery on time to ensure its long life.
źLithium-ion batteries can be charged at any time without reducing
their life. Interruption of the charging process does not cause any
damage to the battery.
źOvercharging may reduce battery life. Do not leave the charger in for
longer than necessary. Stop charging the battery when it is fully
charged.
źIf the tool is not used, the battery deteriorates. To ensure its maximum
performance, charge the battery after long storage or when the
device was not used for a long time. Charge the battery at least every
three months.
The vibration level value given refers to basic application of the tool. If the
n Operation
tool is used for other applications or with other tools, or if it is not
maintained properly, the vibration level may differ from the values given.
The above-mentioned causes may lead to higher exposure to vibrations
during the whole work time.
One must implement additional safety measures to protect the operators
from exposure to vibrations, such as maintenance of the electric tool and
work tools, assurance of proper hand temperature, or determination of
the sequence of work operations.
The declared total vibrations and declared noise emissions were
measured in accordance with a standard test method and may be used
for tool comparison.
The declared total vibrations and noise emissions can be used in
preliminary exposure assessment.
Warnings:
The vibrations and noise emissions during the actual use of the power
tool may differ from the declared values depending on how the tool is
used and on the type of the workpiece in particular.
Determine safeguards to protect the operator. They should be based on
The sprayer is designed to spray or water plants. It can also be used for
cleaning glass, car windows, tiles, etc.
Please do not use the device otherwise than indicated above as it voids
the warranty and the manufacturer's liability for damage.
Any modifications introduced by the user void manufacturer's liability for
The pressure sprayer is delivered with the battery partially charged.
damage and losses to the user and surroundings.
Charge the battery before use with the USB/microUSB cable included
and a USB wall charger (you can use a standard smartphone or tablet
charger, but for the best results use a 5.0 V DC 0.5 A charger).
Device components (see page 2):
TECHNICAL PARAMETERS:
1. Unscrew the tank (9) as shown in Fig. B. Add the required amount of
water. Screw the tank back on.
2. The device is activated with the switch (6). Press the switch again to
turn it off.
3. The nozzle can be set to jet or mist as required. The mode is set by
rotating the nozzle cover (1) (see Fig. C).
PROTECTION OF THE ENVIRONMENT:
NOTE: The symbol nearby denotes that old equipment must
never be thrown away together with other waste (with the
penalty of a fine). Hazardous components of electronic
equipment may adversely affect the natural environment and
human health.
Each household may contribute to the recovery and reuse (recycling) of
old machinery and equipment. Both in Poland and Europe a system for
recovery of used equipment either exists or is being created. The system
obliges all organizations that sell such equipment to collect the used
machinery and appliances. Moreover, general purpose collecting points
Supply voltage
3,6 V DC
Battery capacity 2000mAh
Battery type Li-ion
Weight 0,345 kg
Charging current 500mA
Charging time 4-5h
Tank capacity 1L
o
Operating temperature >0-40 C
Acoustic pressure level(LpA)
Acoustic power (LwA)
Tolerance of measurements K K
LpA, LwA
Vibration level a (Tolerance of
h
measurements K=1,5 m/s²)
3 dB(A)
75,2 dB(A)
86,2 dB(A)
1,137 m/s²
LED
Status
Blinking Charging in progress
Charging complete, battery fully charged
On
Bekijk gratis de handleiding van Proline 07909, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Proline |
| Model | 07909 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9929 MB |
