Proel SOURCEPRO handleiding
Handleiding
Je bekijkt pagina 12 van 36
12
DAB RADIO OPERATIONS
• INF button
Short press to display various information of current station.
Long press to enter in the setting MENU, press ▼T or T▲ to select different settings, press ENTER to
confirm:
MENU < Autotune >: Starts the auto scanning of all available DAB stations and store them in
alphabetical order (please note them are not stored into preset memories, see further). Press ENTER
to confirm.
MENU < Manual tune >: In case the auto scan fails to tune a specific DAB station, you can proceed to
tune it using manual tuning. Press ▼T or T▲ to set the frequency and store it as specified below.
MENU < Prune >: To remove stations that are listed but unavailable.
MENU < DRC >: Some DAB broadcasts offer dynamic range compression (DRC). This feature allows
radios to compress the dynamic range of the output audio stream, so that the volume of quiet
sounds is increased, and the volume of loud sounds is reduced. This can be useful if you are listening
to music with a high dynamic range in a noisy environment. Use the ▼T or T▲ buttons to choose
between <DRC off> <DRC low> or <DRC high>.
MENU < SW Version >: shows the current software version.
MENU < Language >: you can choose between different interface languages: < English >, < Deutsch
>, < Francais >, < Italiano >, press ENTER to confirm.
MENU < Factory Reset >: choose between < Yes > or < No >, press ENTER to confirm. Note that
factory reset erases all preset memorized: FM, DAB , Bluetooth, SD card and USB pendrive.
• SCAN button
Starts the auto scanning of all available DAB stations and store them in alphabetical order (please note them
are not stored into preset memories, see further).
• ▼T ▲T buttons
Press to skip to the next or previous DAB station stored in alphabetical order.
• MEM button
Press it to memorize stations:
Use ▼T or T▲ to select desired DAB station.
Press MEM to enter memory mode.
Press ▼MEM or MEM▲ to select from preset P1 to preset P40.
Press MEM again to memorize the preset.
• ▼MEM MEM▲ buttons
Press them to recall the previous or next preset from P1 to P40.
• M1 ~ M10 buttons
Short press recalls the stations from P1 to P10 memorized position.
Long press stores the current station into the P1 to P10 memory position.
Bekijk gratis de handleiding van Proel SOURCEPRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Proel |
| Model | SOURCEPRO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6274 MB |
