Proel AE604 handleiding
Handleiding
Je bekijkt pagina 16 van 48
16
USRMAN_AE604EN_REV003
MENU DESCRIPTION
5.1 Status Description
The system is designed to manage different operating conditions which, according to Standard EN54, are identified in five status. The system
status is displayed by the LEDs on the front panel of the system and of the remote emergency microphone workstations.
QUIET Status:
Operating condition “at rest”, without faults, no playback of voice alarms and no active “disablements.” Only the
diffusion of background music or generic messages (not alarm ones) is allowed. When the system is in the quiet
status only the green LED is lit on the front panel of the unit, to indicate that the system is powered.
ALARM Status (VOICE ALARM):
Operating condition where a pre-recorded or speakerphone voice alarm is being issued from the emergency
microphone workstation. It can be activated via an external device connected to one of the supervised contacts, or
from an emergency microphone workstation. While a voice alarm is issued, the system turns on the red LED to
indicate the voice alarm status. The green LED remains on to indicate that the system is powered.
The display will show a POP-UP window indicating the source of the voice alarm in progress.
FAULT Status (FAULT WARNING):
Operating condition indicating the presence of at least one fault detected by the internal diagnostic system. The
status indication is accompanied by a fault intermittent acoustic signal (buzzer) and the yellow LED lighting up on
the unit panel. The green LED remains on to indicate that the system is powered.
The display will show a POP-UP window indicating the number of detected faults and a brief description.
DISABLEMENTS Status:
Operating condition in which the functions of one or more system sections are disabled.
Even the faults related to the disabled section are suspended since safety functions are deactivated. This condition
allows operating on the system without turning it off and without the fault condition (FAULT WARNIGS) being
activated.
The display will show a POP-UP window indicating the number of active “disablements” and a brief description of
the section(s).
SYSTEM FAULT Status
Indicates the attempt by the machine to re-initialize following a block in the execution of the software.
Two cases are distinguished:
1) If the machine restarts correctly, normal operation is resumed (but the System Fault LED remains on); try
if the machine responds correctly to the commands.
2) A serious fault has occurred, the machine has not re-initialized and does not respond to commands.
In both cases, switch off the machine completely (disconnect the mains plug and the battery socket), then repeat
the power on procedure.
NOTE: Operating conditions may also occur simultaneously. The LEDs corresponding to the active conditions will light up on the front panel and
the display will show a POP-UP window indicating which and how many events are active. If the number of events exceeds the number of rows
of the POP-UP window, it is necessary to collapse the visualization, the messages are gathered on type and can
be read using the arrows on the front panel. The messages groups are: “Voice Alarm “_ active voice alarm
messages, “Fault warnings“ current faults “ Disablements “ the different sections are off. On the POP-UP
windows the number of the events for each category are displayed.
Bekijk gratis de handleiding van Proel AE604, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Proel |
| Model | AE604 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10950 MB |
