Pro-User IBC7500B handleiding
Handleiding
Je bekijkt pagina 9 van 64
9
Charging
Your Pro-User IBC charger can easily be configured to charge many different types of batteries.The
following recommendations should, however, only be seen as guidelines. When in doubt, always consult
the battery manufacturer for further instructions.
Note:
Depending on the condition of the battery, the charger adapts the charging currents to ensure
optimum charging of the battery. Only during the main charging phase, the battery is charged with the
maximum charging current. Shortly before the maximum charging capacity has been reached the
charging current is reduced. This ensures a gentle and best possible charging up to the battery’s
maximum capacity.
Item
Description
MODE-Button:
Press to select the operation mode:
12V battery: Standby, Car-Mode, Car-Mode+ Frost-Mode
24V battery: Standby, Truck-Mode, Truck-Mode + Frost-Mode
Long-press
for 3 seconds: Standby, ADVANCED AGM 12V, LITHIUM-Mode,
RECOVER-12V-Mode
Long-press
for 3 seconds
with no battery
connected): Standby, SMPS 13.6V
(Only to be used by qualified persons)
After selecting the charging mode, the charging program begins
automatically, if no further action is taken.
24V-Truck-Mode:
voltage: 29.0V charging current: up to 7.5A
Suitable for 24V batteries with a capacity higher than 10Ah.
12V-Car-Mode:
voltage: 14.5V charging current: up to 7.5A
Suitable for 12V batteries with a capacity higher than 18Ah.
If the battery voltage is between 2.0V and 14.0 V, the battery is identified
as a 12 V battery. By pressing the MODE-button the 12V charging program
is started.
Bekijk gratis de handleiding van Pro-User IBC7500B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Pro-User |
| Model | IBC7500B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8722 MB |