Prixton Smart Guard DV50 handleiding
Handleiding
Je bekijkt pagina 13 van 45
5.6 PIR sensitivity setting
Click “PIR” to set sensivity
PR: Low /Medium/High/Off.
*Off: Turn off the PIR function.
*Low. If any movement before the camera is detected for more than 7 seconds, please wake up
and record the material. The notification will be sent to the mobile device at the same time.
*Medium: If any action before the camera is detected for more than 5 seconds, wake up and
record the material, and at the same time send a notification to the mobile device.
*High: If any action before the camera is detected and lasts for more than 1 second, wake up
and record the material. The notification will be sent to the mobile device at the same time.
Note: In a crowded environment. It is recommended to turn off the device or set it to low
sensitivity to reduce unnecessary wake up and notification pushes to extend battery life.
5.7 Memory card settings
Click “Memory Card Settings” to check the Micro SD card status, including total capacity, used
and remaining capacity or format the memory card.
6. Note for using
a. When a fully charged rechargeable lithium battery is used to power the device. The battery
normally can supports 1-3 months usage. When the battery voltage is low, the mobile device
APP will send a notification. If you receive a notification, please charge the device in time.
b. Place the camera within the range of the router.
Make sure to choose a place covered by WiFi signal. Even near the router, thick or insulated
doors can greatly reduce the strength of the WiFi signal. It is recommended to test before
installing the camera.
c. The device is designed based on low-power components and can be remotely awakened
from APP through PIR human motion detection or doorbell pressing. After each wake-up, the
device will work for 25 seconds and ther return to standby.
Technical specifications
Resolution: 480*320
Perspective: 160º degree
IR LED: 850mm
WIFI: IEEE 802 11 b / g / n
Audio: Two-way talk, noise reduction
Memory card type: Micro SD card
Storage support: 8/16/32/64/128GB
Battery: 1*5000 mAh lithium battery
Monitoring method: Doorbell button, motion detection, remote wakeup
Energy consumption: Standby: 500uA; Working: 400mA
*1*5000 mAh battery normally can supports 1-3 months usage.
13
Bekijk gratis de handleiding van Prixton Smart Guard DV50, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Prixton |
| Model | Smart Guard DV50 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7254 MB |
