Prixton P115 handleiding
Handleiding
Je bekijkt pagina 36 van 130
REPLACING THE PRESER FOOT
CAUTION!
Risk of injury!
lmproper handling of the sewing machine may result in
injury.
- Always unplug the sewing machine, disconnect the foot
pedal, remove the batteries, and make sure the power
Standby/speed switch is set to "Standby" befare replacing
the presser foot.
1. Unplug the sewing machine, disconnect the foot pedal,
and make sure the power Standby/speed switch is set to
"Standby."
2. Place the sewing machine on a flat and level surface.
3. Turn the handwheel counterclockwise to raise the
needle to its highest position.
4. Lift up the presser foot lifter and lift up the presser
foot locking lever. The presserfoot will automatically drop
off from the locking device.
5. Put a new presser foot under the presser foot locking
device.
6. Lower the presser foot lifter and lift up the presser foot
locking lever to reconnect the presser foot.
Technical specifications
Sewing machine
Battery output: 6 V 1,500 mA
Motor power: approx. 9W max.
Lamp power: approx. 0.06 W
Sewing speed: approx. 300 stitches/min.
Adjustable zigzag width: max. 3/16" (4 mm)
Adjustable stitch length: max.1/8"-3/16" (3-4 mm)
Adjustable stitch width: max. 3/16" (4 mm)
Dimensions (L x W x H): 280x130x245mm
Power adapter
Input: 100-240 V-, 50/60 Hz, Max. 500 mA
Output: 6 V 1,500 mA
36
Bekijk gratis de handleiding van Prixton P115, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Prixton |
| Model | P115 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17247 MB |
