Prixton P115 handleiding
Handleiding
Je bekijkt pagina 25 van 130
Needle replacement
CAUTION: Disconnect the AC/DC adapter
before starting to replace the needle.
1. Turn the hand wheel to raise the needle
to its highest position.
2. Hold the old needles and loosen the
needle clamp screw. Remove the old
needle and discard responsibly.
3. lnsert a new needle into the clamp with
the flat side of the needle towards the back
of the sewing machine. Be sure to push the
needle all the way into the clamp before
tightening the needle clamp screw.
Before first use
•Remove all packaging of the device.
•Check if the voltage of the appliance corresponds to the main voltage of your home.
Connecting To The Power Source
1. Make sure the "OFF/ I & II speed switch" is on the "OFF" position.
2. Connect the jack position A to the DC input socket on the back of the sewing machine, and
connect the plug position B into the main power supply.
3. Connect the foot pedal position C to the sewing machine by inserting the jack into the foot
pedal input socket on the back of the sewing machine.
4. You can either use the foot pedal (please keep the power/speed switch on the off position) or
the power/speed switch (II setting for high sewing speed whilst the I stand for low sewing
speed) to operate the sewing machine.
CAUTION: Whenever the sewing machine is not in use, make sure it is switched off and
unplugged from the mains power supply.
25
Bekijk gratis de handleiding van Prixton P115, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Prixton |
| Model | P115 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17247 MB |
