Handleiding
Je bekijkt pagina 6 van 24
EN
INSTRUCTIONS
To carry out the installation, first take precise measurements (using a level to ensure
horizontality) and drill the wall or ceiling at the desired location. Then insert the wall plugs
into the holes using a hammer. Finally, screw in the threaded hooks, which will serve as
support for the screen’s mounts.
Before first use, please ensure that the installation is completely horizontal. If not, the screen
may roll unevenly when retracted, which could damage the fabric edges.
The screen can be operated in two ways: via remote control or directly through the
integrated control. For manual operation, simply press the buttons labeled UP, DOWN, and
STOP on the control box. Additionally, the screen is equipped with an automatic stop system
that activates when the fabric is fully retracted into the housing or when the top black
border is fully extended. The user can also stop the screen at any desired intermediate
position.
WARNINGS
It is recommended to keep the screen away from high heat sources or open flames.
Do not manually bend the fabric surface, as this may cause permanent marks.
Do not pull the screen fabric manually to avoid damaging the motor mechanism.
In case of dirt, clean gently with a slightly damp cloth. The use of solvents, chemical liquids,
or any substance that may leave permanent marks on the screen surface is not
recommended.
Anchors
Housing / Cover
Black border
Projection area
Bottom bar
Integrated
control
Remote
control
6
Bekijk gratis de handleiding van Prixton Cinema Max, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Prixton |
| Model | Cinema Max |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 2567 MB |