Handleiding
Je bekijkt pagina 8 van 40
3 Installation
B In case the information which are
given in the user manual are not
taken into account, manufacturer
will
not assume any liability for this.
Points to be paid attention
to when the relocation of the
refrigerator
1. Y
our refrigerator
should be
unplugged.
Before transportation of
your
refrigerator
it should be
emptied
and cleaned.
2. Before it is
re-packaged, shelves,
accessories, crisper,
etc. inside your
refrigerator should be fixed with
adhesive
tape and secured against
impacts.
Package should
be bound
with
a thick tape or sound ropes and
the transportation rules
on the
package
should be strictly observed.
3. Original packaging and foam
materials should
be
kept for future
transportations or moving.
Before you start the
refrigerator
Check the following before you start to
use your refrigerator:
1.
Is the interior of the refrigerator dry
and can the air circulate freely in the
rear of it?
2.
Clean the interior of the refrigerator
as recommended in the
“Maintenance and cleaning” section.
3.
4.
Connect the plug of the refrigerator
to the
wall
socket. When the fridge
door is
opened, fridge internal
lamp
will turn on.
When the compressor starts to
operate,
a sound will
be heard. The
liquid and gases
sealed within the
refrigeration system
may also give
rise to noise, even
if
the compressor
is not running and this is quite
normal.
5. Front edges of the refrigerator
may feel warm. This is normal.
These areas are designed to be
warm to avoid condensation.
Electrical connection
Connect your product to a grounded
socket which is being protected by a
fuse with the appropriate capacity.
Important:
The connection must be in compliance
with national regulations.
• The power plug must be easily
accessible after installation.
• Electrical safety of your refrigerator
shall be guaranteed only if the earth
system in your house complies with
standards.
• The voltage stated on the label
located at left inner side of your
product should be equal to your
network voltage.
• Extension cables and multi
plugs must not be used for
connection.
EN / 7
B
A damaged power cable must be
replaced by a qualified electrician.
B
Product must not be operated
before it is repaired! There is the
risk of electric shock!
Bekijk gratis de handleiding van Privileg PRCI 12GF2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Privileg |
| Model | PRCI 12GF2 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 4976 MB |