Handleiding
Je bekijkt pagina 59 van 68
59
WWW.PRIMO-ELEKTRO.BE
• Avoid direct sunlight and heat. Direct sunlight may aect the acrylic coating.
Heat sources nearby will cause higher electricity consumption.
• Avoid very moist places. Too much moisture in the air will cause frost to form very
quickly on the evaporator, and your freezer.
• Before connecting your freezer to the power supply, check that the voltage
stated on the rating label of your appliance corresponds to the voltage in your
home. A dierent voltage could damage the appliance.
• After installation, leave the freezer for 24 hours before turning it on. This way the
refrigerant can settle.
• Allow the appliance to run empty for 12 hours so the compartment can cool to
the appropriate temperature.
• The climate class indicates the minimum and maximum ambient temperature for
the proper operation of an appliance. You can nd the climate class on the type
plate on the back of the appliance.
- SN: Subnormal: ambient temperature between 10°C and 32°C
- N: Normal: ambient temperature between 16°C and 32°C
- ST: Subtropical: ambient temperature between 16°C and 38°C
- T: Tropical: ambient temperature between 16°C and 43°C
DOOR CONVERSION
The freezer has a reversible door. If you need to hinge your door on the opposite
side it is recommended that you call your local authorised service agent to make this
conversion or ask a technician. Before you reverse the door, you should ensure the
appliance is unplugged and empty.
1. Remove the screws on the back of the top cover.
Reverse Door
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It' s better that 2 people handle the unit during assembly.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
Bekijk gratis de handleiding van Primo PR189DV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Primo |
| Model | PR189DV |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 4492 MB |
