Handleiding
Je bekijkt pagina 43 van 68
43
WWW.PRIMO-ELEKTRO.BE
ÖFFNUNGSRICHTUNG DER TÜR ÄNDERN
Der Türanschlag des Gefrierschranks kann verändert werden. Wenn Sie die
Scharniere der Tür auf die andere Seite versetzen möchten, empfehlen wir, einen
anerkannten Fachmann zu kontaktieren und ihn diese Arbeiten durchführen zu
lassen. Bevor Sie die Önungsrichtung ändern, kontrollieren Sie, ob der Stecker aus
der Steckdose gezogen wurde und dass das Gerät leer ist.
1. Entfernen Sie die Schrauben der oberen Abdeckung.
Reverse Door
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It' s better that 2 people handle the unit during assembly.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
2. Entfernen Sie die obere Abdeckung vom Gefrierschrank.
Reverse Door
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It' s better that 2 people handle the unit during assembly.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
3. Entfernen Sie die Schrauben und anschließend das obere Scharnier, dass
die Tür in ihrer Position hält. Heben Sie die Tür hoch und legen Sie diese zur
Vermeidung von Kratzern auf inen weichen Untergrund.
Reverse Door
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It' s better that 2 people handle the unit during assembly.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
Bekijk gratis de handleiding van Primo PR189DV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Primo |
| Model | PR189DV |
| Categorie | Vriezer |
| Taal | Nederlands |
| Grootte | 4492 MB |
