Handleiding
Je bekijkt pagina 79 van 88
79
WWW.PRIMO-ELEKTRO.BE
REFRIGERATOR OPERATION
• Press the temperature setting button to change the temperature setting.
• Each press of the button will change the setting to 1 step lower on the display:
• In supercooling mode, the fridge will be set to 2°C and remain in this mode for 24
hours. Then the fridge returns to the previously set temperature setting.
I You can end the supercooling mode early by pressing the temperature
setting button and choosing the desired temperature.
I Malfunction
In case of a malfunction or defect, a combination of two settings will light up on the
display. In this case, contact PRIMO Elektro’s after-sales service, the customer service
department of the shop where you purchased the appliance, or the nearest qualied
service centre for repairs.
See also under “Problems and solutions”.
FREEZER OPERATION
• The controls for the freezer are located on the back wall of the
fridge, at the bottom left, behind the vegetable drawer.
• Slide the switch up and the actual temperature in the freezer
compartment will drop. Slide the switch down and the actual
temperature in the freezer compartment will rise.
STORAGE GUIDE
The higher up in your appliance, the warmer. So whatever spoils fastest (sh, meat,
etc.) is best put at the bottom. The door is the least cold because it opens regularly.
For the best storage, set up your refrigerating appliance as follows:
Bekijk gratis de handleiding van Primo PR184CIN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Primo |
| Model | PR184CIN |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 7054 MB |
