Handleiding
Je bekijkt pagina 74 van 88
PR184CIN
74
• Let air circulate freely around the cabinet.
• Make sure there is sucient space to open the door.
• This cooling unit is not intended for use as a built-in appliance.
• Select a place with a strong, level oor.
• Avoid direct sunlight and heat. Direct sunlight may aect the acrylic coating.
Heat sources nearby will cause higher electricity consumption.
• Avoid very moist places. Too much moisture in the air will cause frost to form very
quickly on the evaporator, and your refrigerator.
• Before connecting your refrigerator to the power supply, check that the voltage
stated on the rating label of your appliance corresponds to the voltage in your
home. A dierent voltage could damage the appliance.
• The plug is the only way to disconnect the device from the power supply, make
sure it is always easily accessible. To disconnect power to the device, turn o the
device and then unplug it.
• After installation, leave the fridge for 6 hours before turning it on. This way the
refrigerant can settle.
• Allow the appliance to run empty for 12 hours so the compartment can cool to
the appropriate temperature.
• You can level the appliance using the adjustable legs. The adjustable legs can be
adjusted by screwing them in or out of the appliance.
59,5 cm
10 cm
63 cm
108 cm
101,5 cm
10 cm
7,5 cm
135°
10 cm
Lift Lower
Bekijk gratis de handleiding van Primo PR184CIN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Primo |
| Model | PR184CIN |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 7054 MB |
