Pride Go Go Travel Mobility handleiding
Handleiding
Je bekijkt pagina 21 van 28
Scooter Consumer Safety Guide 21
HAZARD IDENTIFICATION
The hazard identification surround shape is represented as a black symbol on a yellow triangle with a black
border. It is used to indicate a potentially hazardous condition/situation that could result in personal injury,
component damage, or malfunction. Follow all recommended mandatory and prohibited actions to avoid or
prevent potentially hazardous conditions/situations.
WARNING! Battery harnesses must be connected in the proper manner. RED (+) cables must be connected
to positive (+) battery terminals/posts. BLACK (-) cables must be connected to negative (-) battery terminals/
posts. Protective caps should be installed over all battery terminals. REPLACE cables immediately if damaged,
making sure to follow the battery terminal orientation depicted on the battery wiring diagram located in the
product owner’s manual and on the scooter.
WARNING! Do not remove the fuse links from the battery harnesses. If the fuse links appear damaged, contact
your authorized provider for service.
WARNING! Do not attempt to charge the batteries by connecting cables directly to the battery terminals. Do
not attempt to charge the batteries while operating the scooter.
WARNING! If your scooter is equipped with more than one battery, do not mix old and new batteries. Always replace
all batteries at the same time.
WARNING! Always operate charger in a well-ventilated area as it is essential for proper cooling. Ensure vent
holes are clear of blockages before use and always place the charger on a hard, flat surface during charging.
Before each use, ensure the charger is not covered with any items such as blankets or articles of clothing.
Do not place the charger in enclosed areas such as pouches or bags. Failure to allow for proper ventilation
may result in damage to the charger.
WARNING! Check battery and battery box for signs of damage. If any battery or battery box appears damaged,
contact your authorized provider immediately.
WARNING! Be aware that the battery charger case may become hot during charging. Avoid skin contact and
do not place the charger on surfaces that may be affected by heat including carpeting or clothing.
WARNING! If the battery charger is equipped with cooling slots, then do not attempt to insert objects through
these slots and keep the cooling slots free from objects.
WARNING! Do not charge in direct sunlight or near heat sources.
WARNING! Contact your authorized provider if you have any questions regarding the batteries in your scooter.
Battery Recycling and Disposal
If you encounter a damaged or cracked battery, immediately enclose it in a plastic bag. Never install a
battery with a cracked or damaged case. Wear safety goggles and gloves in order to avoid contact with
skin and eyes. Contact your local waste disposal agency or your authorized provider for instructions on
proper battery disposal and recycling.
NOTE: This statement applies to Sealed Lead Acid (SLA) (AGM/Gel-Cell) only: If you discover
battery acid on or around either battery, apply baking soda to the affected areas to neutralize the
acid. Before reinstalling new batteries, clean the baking soda from the affected areas.
WARNING! If you notice smoke or a smell emitting from the battery box, immediately move the battery box
or your entire mobility product to a well-ventilated area. Failure to heed may result in personal injury and/or
property damage.
Removable Parts
WARNING! Do not attempt to lift or move your scooter or seating system by grasping or holding onto any
of its removable parts, including the armrest(s), seat cushions, seatback, or shrouds. Grasp only solid, non-
removable frame components to lift or move your scooter or seating system.
Preventing Unintended Movement
WARNING! If you anticipate being seated in a stationary position for an extended period of time, turn off the
power to the scooter. This will prevent unexpected motion from inadvertent throttle control lever contact.
This will also eliminate the possibility of unintended scooter movement from electromagnetic (EM) sources.
WARNING! Avoid using long or dangling key chains, key fobs, or key rings with dangling accessories that may
interfere with the operation of the throttle control lever, resulting in unintended or uncontrolled movement of
the scooter.
Bekijk gratis de handleiding van Pride Go Go Travel Mobility, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Pride |
| Model | Go Go Travel Mobility |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3140 MB |