Pride Go Go Travel Mobility handleiding
Handleiding
Je bekijkt pagina 12 van 28
12 Scooter Consumer Safety Guide
HAZARD IDENTIFICATION
The hazard identification surround shape is represented as a black symbol on a yellow triangle with a black
border. It is used to indicate a potentially hazardous condition/situation that could result in personal injury,
component damage, or malfunction. Follow all recommended mandatory and prohibited actions to avoid or
prevent potentially hazardous conditions/situations.
Figure 3. Normal Driving Position
Figure 4. Increased Stability Driving Position
Freewheel Mode
Our scooters are equipped with a manual freewheel lever system to allow for manual maneuverability
by the user or a trained attendant. When the scooter is in freewheel mode, the braking system is
disengaged. The scooter should always be returned to drive mode to lock the brakes before leaving the
scooter occupant unattended or returning control of the scooter back to the user.
WARNING! Do not place the scooter in freewheel mode while on an incline or decline. This could cause the
scooter to roll uncontrollably on its own.
WARNING! Do not use your scooter in freewheel mode without an attendant present.
WARNING! Do not place the scooter in freewheel mode while the unit is powered up. Always turn the scooter
power off and remove the key from the key switch before engaging or disengaging freewheel mode.
An added feature built into the scooter is “push-too-fast” protection which safeguards the scooter against
gaining excessive speed while in freewheel mode.
“Push-too-fast” operates differently depending on which of two conditions exists:
■ If the key is switched “off” while in freewheel mode, the scooter’s controller activates regenerative
braking when the scooter is pushed faster than a maximum threshold which has been preprogrammed.
In this case, the controller is acting as a speed governor.
■ If the key is switched “on” while in freewheel mode, you will encounter considerable resistance at any
speed. This prevents the scooter from gaining unwanted momentum should the manual freewheel
lever inadvertently be released while driving the scooter.
WARNING! Your scooter has been tested in accordance with certain ANSI-RESNA and ISO standards. You
should not exceed the performance specifications of your scooter as noted in the product specifications.
WARNING! Any attempt to climb or descend a slope steeper than that specifically listed in your scooter
product specifications may put your scooter in an unstable position and cause it to tip.
WARNING! Never carry an oxygen tank weighing more than 10 lbs. (4.5 kg). Never fill the front or rear basket with
contents exceeding 10 lbs. (4.5 kg). Doing so could affect the center of gravity of the scooter, resulting in a tip over.
WARNING! The distance required to bring your scooter to a complete stop on a decline is significantly greater
than on level ground. Always allow enough distance for your scooter to come to a complete stop when on an
incline or decline. Failure to heed may result in an uncontrolled stop which may cause personal injury and/
or property damage.
WARNING! When loading or unloading an unoccupied scooter for transport, do not exceed the Maximum
Rated Slope that is listed on the product specification and on the data plate that is affixed to the scooter
frame. Failure to heed may cause the scooter to become unstable and tip over, resulting in product damage
or personal injury.
When you approach an incline, it is best to lean forward. This shifts the center of gravity of you and your
scooter toward the front of the scooter for improved stability. See figures 3 and 4.
Bekijk gratis de handleiding van Pride Go Go Travel Mobility, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Pride |
| Model | Go Go Travel Mobility |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3140 MB |