PreSonus UC Surface handleiding
Handleiding
Je bekijkt pagina 63 van 75
9 The Settings Page
9.8 Smaart System Check Wizards (StudioLive AI-series only)
UC Surface
Reference Manual
System Delay Wizard
To launch the System Delay Wizard, click on the System Delay tab and select the
speaker output you want to delay. From the bottom pull-down menu, select
the speaker output to which you’d like to align. This can be your main outputs
or any of the subgroup outputs, even if the subgroup outputs have been
delayed. Click OK to start the wizard and follow the onscreen instructions.
Note: StudioLive RM/RML users must rst select a talkback input from the talkback
channel. Once selected, this will be the input source targeted by the Smaart System
Delay Wizard.
Once you have positioned and delayed your satellite system, you will want to
match the output levels of the main and delay systems. To do this, use an SPL
meter to match the output of the main and delay systems at the delay-system
measurement position. This means that if you are standing 20 ft from the left side
of the main system and 30 ft from the left side of the delay system, and the output
of the main system is 85 dB, the output of the delay system should also be 85 dB.
Note: For delay times between 0 and 50 ms, the delay will be set to the nearest 0.5 ms;
between 51 and 100 ms, the delay will be set to the nearest 1 ms; and between 102 and
300 ms, the delay time will be set to the nearest 2 ms.
FOH Mix Position
Delay System
Measurement Position:
1) Frequency Response
(SRA Wizard)
2) Delay Time
(SSD Wizard)
3) SPL Reference Point
MAIN
DELAY
Bekijk gratis de handleiding van PreSonus UC Surface, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PreSonus |
| Model | UC Surface |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14432 MB |
