PreSonus UC Surface handleiding
Handleiding
Je bekijkt pagina 58 van 75
55
9 The Settings Page
9.8 Smaart System Check Wizards (StudioLive AI-series only)
UC Surface
Reference Manual
9.8 Smaart System Check Wizards (StudioLive AI-series only)
When connected to a StudioLive AI-series mixer, UC Surface includes three System
Check Wizards to provide you with the ability to view the frequency response of the
venue; quickly calculate and set delay system timing; and verify output connectivity.
Note: Smaart System Check Wizards are not available with StudioLive Series III consoles.
Traditionally, in professional sound reinforcement, the mixing console is there to
mix, and the system processor is there to align and tune the speaker system. When
functioning and set correctly, the system processor is invisible to everyone but
the System Engineer. For the rst time, the tools used to tune and align speaker
systems are built into the mixing console itself and accessible to any engineer
who wants to improve their PA’s sound and get the most out of their PA system.
For all but the most seasoned professional sound technician, this is a new extra
step in the process of setting up for a show. For most FOH engineers, getting a
good mix is a big victory. But imagine being able to recreate that same killer mix
night after night, show after show. Once the system has also been optimized
for the environment it is in, any FOH engineer working on it will achieve that
big victory without so much work. This is why system alignment is a standard
procedure in professional level sound reinforcement. Again, this solution is not
typically achieved from the mixing console, but built into the system design itself.
The Smaart System Check Wizards in UC Surface merge these two worlds.
Clicking on the Smaart Wizards tab in the Settings page will launch Smaart System
Check mode. While in this mode you can launch any of the following wizards:
• SRA: Smaart Room Analysis generates a frequency-response trace
and overlays it on the parametric EQ in UC Surface so you can adjust
your system to get rid of unwanted anomalies in the room.
• SSD: Smaart System Delay calculates and sets the correct
amount of delay time between two full-range systems.
• SOC: Smaart Output Check veries that your system outputs
are routed correctly and are passing signal.
To run any of the Smaart System Check Wizards, UC Surface
will need to take over your mixer. When you rst click on the
Smaart Wizards, you will see a warning to this eect.
Clicking on the “Proceed” button will launch the Wizard select window and you will
no longer have control over your mixer. You can exit the Wizards and regain control
at any point simply by clicking on one of the other tabs or closing the Settings Page.
Note: To run the SRA and SSD wizards, you will need to connect a measurement
microphone to your StudioLive’s Talkback input. You’ll also need a mic stand and a long
enough cable to place the mic in front of your speakers.
A measurement microphone is special type of condenser microphone
that is designed to provide an accurate reproduction of a room’s sound
characteristics for use with audio-analysis tools, such as RTAs and spectrographs.
Bekijk gratis de handleiding van PreSonus UC Surface, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PreSonus |
| Model | UC Surface |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14432 MB |
