PreSonus UC Surface handleiding
Handleiding
Je bekijkt pagina 46 van 75
43
9 The Settings Page
9.2 Networking
UC Surface
Reference Manual
9. Solo PFL. Turns PFL soloing on or o.
10. Color Scheme. Luminosity presets to compensate
for environmental light interference.
11. Show Edit Popup. Presents a large display of parameter value for each function
12. Colorize Channels. Allows you to add custom colors to channel strips.
13. Channel ID. Choose between Icon only or Icon with channel number.
9.2 Networking
The Network tab in UC Surface allows you to manage the network settings for you
StudioLive mixer, including managing your Wired Connection settings and
conguring stage boxes as well as other AVB peripherals.
Note: AVB Devices like NSB-series stage boxes and the EarMix 16M are not compatible
with StudioLive AI-series mixers. These products are only compatible with StudioLive
Series III mixers and other 1722.1 compliant AVB products.
9.2.1 Wired Connection
When hardwired to a LAN network via Ethernet, there are three types of IP
conguration schemes available from within UC Surface. Conguring your IP address
allows you customize how your StudioLive mixer will present itself to other devices
on the network. In most cases, you will use the default Dynamic IP mode setting.
Dynamic Mode. This is the default setting for StudioLive mixers and is the most
common way you will use your mixer on a network. In Dynamic IP mode, the mixer is
assigned an IP address by a DHCP server. Because of this, Dynamic IP mode requires
that your StudioLive be connected to a network that also has a router connected.
In this mode, your mixer will request an IP address from the DHCP server when it is
powered on. The DHCP server will then answers and assign the mixer a unique IP
address. The mixer will continue to send and wait for an answer to its DHCP requests.
Static Self-Assigned Mode. When two network devices are directly
connected to each other or a switch, rather than to a network router,
they cannot have their IP addresses assigned dynamically. In this case,
the devices must be able to self-assign their own IP addresses.
The most common direct Ethernet connection scenario is while using a StudioLive
Series III console mixer connected directly to your computer to utilize DAW mode.
In this mode the mixer will automatically assign itself an IP
address in the 169.254.0.0/16 range, allowing connection
with other devices in the same IP address range.
Static Manual Mode. This mode is typically reserved for more complex networking
installations or situations that otherwise require setting static IP addresses. In
this mode, you can manually assign an IP address, subnet mask, and gateway. If
you’re not sure how to manually congure static IP address assignments, please
consult your IT administrator before attempting to congure your StudioLive
mixer in Static Manual IP Address mode. Unless you have a specic need for static
Bekijk gratis de handleiding van PreSonus UC Surface, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PreSonus |
| Model | UC Surface |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14432 MB |
