PreSonus SL Room Control handleiding
Handleiding
Je bekijkt pagina 7 van 28
2 Networking Your Loudspeaker
2.3 Step 3: Connecting your Network
SL Room Control
User Guide
5
Connecting wirelessly (auto-setup)
Your StudioLive AI loudspeakers have been preprogrammed to join a specific wireless
network. Simply configure your wireless router network with the name “StudioLive”
and secure it with the password “StudioLive.” Your loudspeakers will automatically
join when they are powered on with their USB LAN adapters connected.
iPad running
SL Room Control
wireless router
“StudioLive”
password: StudioLive
Joining a new network
To connect the loudspeakers wirelessly to a new network for the first time, you need
to hardwire your loudspeakers to your router and use SL Room Control to save the
intended network’s information. The instructions below can be used to give any
number of StudioLive AI loudspeakers the ability to connect wirelessly to a new
network. StudioLive AI loudspeakers only support WPA and WPA2 wireless networks.
Power User Tip: If you are connecting some speakers wirelessly, while
others will be hardwired to the same network, temporarily disconnect
the speakers you wish to hardwire while you provision the speakers
that will connect to the network using a USB Wi-Fi LAN adapter.
Bekijk gratis de handleiding van PreSonus SL Room Control, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PreSonus |
| Model | SL Room Control |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6412 MB |
