PreSonus Quantum ES 4 handleiding
Handleiding
Je bekijkt pagina 93 van 97
89
17 Using the StudioLive as an Audio Interface
17.1 Digital Sends and Returns
Universal Control for StudioLive
®
Mixers
Software Reference Manual
17.1.2 Auxiliary Digital Sends (StudioLive AI-series)
StudioLive AI-series mixers feature additional Digital Sends that can be routed in stereo pairs from the Aux
routing tab in the Settings page of Universal Control. Any combination of eight of the following stereo inputs
and buses can be selected:
y Main Mix Left / Right
y Subgroups
y Aux Mixes
y FX Send Mixes
y Stereo Aux Returns (console mixers only)
y Tape Input Left/Right
y Talkback Left/Right (console mixers only)
y Solo Left/Right
Power User Tip: Note that either channel of the stereo pair can still be accessed on a mono track in your
host application; only the routing must be assigned as a stereo pair. For instance, if you have a backing-vocal
group routed to Subgroup 1 and a guitar group routed to Subgroup 2, you would create two mono tracks in
your recording application. The track whose input is assigned to Subgroup 1 will record the backing-vocal
group, and the track whose input is assigned to Subgroup 2 will record the guitar group. If, however, you
have a stereo drum group assigned to Subgroups 3-4, you can create a stereo track in your recording
application and assign its input to Subgroups 3 and 4.
The obvious exception to this principle is the Talkback Mic input. In this instance, the same signal will be
printed on both sides of the send. In your recording software, you can create a mono track and assign it to
either side of the stereo Digital Send to which it is routed. Both Digital Sends receive the same mono signal
from the talkback mic preamp.
17.1.3 Digital Returns
Each StudioLive input defaults to receive its respective digital return. The DAW Outputs in your recording
application route these playback streams to their respective channels on the StudioLive (that is, the
software’s Output 1 always goes to StudioLive Channel 1 digital return and so on). Once you route a track in
your recording application to play through one of these outputs, it will always be accessible on its channel by
simply pressing the Digital Return button.
Power User Tip: It is important to think of your digital returns and your analog inputs in the same way. When
a digital return is engaged, it replaces the analog input in the mix. You can process it in the Fat Channel,
include in it Aux mixes, and send it to an FX mix. It is also important to note that the analog input is still
available to be recorded, or processed with a plug-in, in your DAW host application even if the digital return
is engaged.
Figure 1: StudioLive AI-series console
Figure 2: StudioLive Series III
Figure 3: Universal Control
StudioLive Series III mixers support the free routing of any Digital Return to any channel via the Digital
Patching menu. StudioLive AI-series mixers are hard-coded to always function in a one-to-one routing.
Bekijk gratis de handleiding van PreSonus Quantum ES 4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PreSonus |
| Model | Quantum ES 4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17151 MB |
