PreSonus Quantum ES 4 handleiding
Handleiding
Je bekijkt pagina 92 van 97
88
17 Using the StudioLive as an Audio Interface
17.1 Digital Sends and Returns
Universal Control for StudioLive
®
Mixers
Software Reference Manual
17 Using the StudioLive as an Audio Interface
The StudioLive mixers feature a built-in audio interface that can be used with any application that supports
Core Audio or ASIO and can also be used as a WDM device for a Windows computer.
Any input and bus with a Select button, and, on some models the Solo bus, tape input, and
talkback mic, can be recorded.
Playback streams from your computer are returned to your mixer and can be patched into any
channel or bus with a Digital Return button.
This section will help to provide a better idea of how audio flows from your mixer to your
computer and back.
1 7. 1 Digital Sends and Returns
When using the StudioLive as an audio interface, it is important to understand the terms “digital send”
and “digital return.” Because the audio interface in the StudioLive is completely integrated with the other
functions of the mixer, the digital (FireWire or USB) I/O is designed to work as an independent bus. You can
route (send) signals from other buses to the digital transport bus, and its output (return) signal is hard-coded
to designated mixer channels.
y The StudioLive 64S, StudioLive 32S, StudioLive 32SX, StudioLive 32SC, StudioLive 32, StudioLive 24,
StudioLive 16, StudioLive 32R, and StudioLive 24R have 64 available sends and 64 available returns.
y The StudioLive 16R has 18 available sends and 18 returns
y The StudioLive RM/RML32AI and RM/RML16AI have 52 available sends and 34 returns.
y The StudioLive 32.4.2AI has 48 available sends and 34 returns.
y The StudioLive 24.4.2AI has 40 available sends and 26 returns.
y The StudioLive 16.4.2AI has 32 available sends and 18 returns.
17.1.1 Channel Digital Sends
Digital Sends from input channels are sent pre-fader, however these sends can be pre- or post-Fat Channel
EQ and dynamics.
To record the EQ and dynamics processing on any channel, simply enable the Post button in the Digital Out
section. It will illuminate, indicating that the Fat Channel signal path is being routed to the Digital Send. If this
mode is not enabled, the signal sent will be post-trim and post-analog insert (if applicable).
Figure 1: StudioLive AI-series console
Figure 2: Universal Control
Figure 3: StudioLive Series III console
Dig Send
Post
DAW
off
StudioLive buses are also equipped with Digital Sends. These sends are always post-Fat Channel and pre-
fader. StudioLive Series III mixers support the free routing of any channel or bus to any USB send. StudioLive
AI-series mixers have 16 auxiliary sends that can be freely routed, see next section.
Bekijk gratis de handleiding van PreSonus Quantum ES 4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PreSonus |
| Model | Quantum ES 4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17151 MB |
