PreSonus Fat Channel XT handleiding
Handleiding
Je bekijkt pagina 39 van 59
36
6 Channel Strip Collection
6.2 RC500 FET Modeling Channel Strip
PreSonus Plug-Ins
Reference Manual
6.2 RC500 FET Modeling Channel Strip
Compressor
Use the Compressor section to control or re-shape the dynamic behavior
of your signal. Compression is often used to reduce the dynamic range
of a signal (to control peaks and accentuate low-level information)
or to accentuate signal peaks, to increase apparent “punch.”
4 Threshold sets the threshold of the compressor, in a range
between –25 and +18 dB. When the amplitude of the input signal
exceeds the threshold you’ve set, the compressor engages.
4 Attack sets the speed at which the compressor acts on input signals that
cross the Threshold setting, in a range between 0.5–10 ms. Slower attack
times allow signal peaks to pop through uncompressed before gain reduction
reaches the amount set by the Threshold and Ratio controls, accentuating the
attack of transient signals. Faster attack times control peaks more closely.
4 Release sets the speed at which the compressor returns to normal after
input signal crosses below the threshold setting, in a range between
40–500 ms. Some signals sound their best with shorter release settings,
some sound best with a longer release. Letting the signal recover faster
from the compression effect can be useful to enhance the room sound
of microphone signals. Slow release settings can create for smooth
and less obvious compression effect. Set this control to taste.
4 Compressor Out/In bypasses (OUT) or enables (IN) the compressor section.
Preamp
This section provides processing tools for the signal,
applied as it enters and exits RC500.
4 Gain. Provides a generous amount of additional gain before your input
signal reaches the compressor and EQ stages. Can be used to reinforce
low-level signals, or to drive the compressor and EQ stages harder.
4 Polarity. Reverses the polarity of your input signal. This can be useful for
minimizing the effects of phase cancellation between signals, especially
when a source has been recorded with more than one microphone.
4 Hi Pass Filter. Lets you toggle the provided high-pass filter on or
off for the input signal. When enabled, low-frequency information
below 80 Hz is attenuated by a slope of 12 dB per octave.
4 Master. Adjusts the overall output level.
Bekijk gratis de handleiding van PreSonus Fat Channel XT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PreSonus |
| Model | Fat Channel XT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5193 MB |
