Prebena MODUL 11-Z80 handleiding
Handleiding
Je bekijkt pagina 42 van 59
Page 14 of 30
Installing the magazine
Attach the magazine in the reverse manner to removing it. Make sure that the guide rails do not
twist when inserting the magazine. Also make sure that the retaining pawl (4) is fully engaged by the
spring force. Push the magazine up to the stop buffer by exerting slight pressure on it. If this does not
work, loosen the lock nut (3) and readjust the position of the stop buffer with the thread. Then
tighten the nut again.
The procedure for changing the magazine is the same for all magazine types.
Which magazines can be used are shown in the overview below:
Magazinausführung
PREBENA-Heftklammer
Type Z50
Z50
Type Z55
Z55
Type Z64
Z64
Type Z67
Z67
Type Z70
Z70
Type Z75
Z75
Type Z80
Z80
Bekijk gratis de handleiding van Prebena MODUL 11-Z80, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Prebena |
| Model | MODUL 11-Z80 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10915 MB |
