Prebena MODUL 11-WP130 handleiding

59 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 42 van 59
Page 14 of 30
Installing the magazine
Attach the magazine (1) in the reverse manner to removing it. Make sure that the guide rails do not
twist when inserting the magazine. Also, make sure that the locking bolt (4) passes through the
intended hole into the angle (6) on the magazine (1), holding it in place. Push the magazine (1) up to
the stop buffer (2) by exerting slight pressure on it. If this does not work, loosen the lock nut (3) and
readjust the position of the stop buffer (2) with the thread. Then tighten the nut again.
The procedure for changing the magazine is the same for all magazine types.
Which magazines can be used is shown below:
Magazine design
PREBENA staples
Type WP75
WP75
Type WP100
WP100
Type WP120
WP120
Type WP130
WP130

Bekijk gratis de handleiding van Prebena MODUL 11-WP130, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkPrebena
ModelMODUL 11-WP130
CategorieNiet gecategoriseerd
TaalNederlands
Grootte10328 MB