Prebena MODUL 11-L64 handleiding
Handleiding
Je bekijkt pagina 19 van 30
Page 19 of 30
a fastener being
driven in.
The stapler is not adequately
lubricated.
Fill PREBENA special nailer oil into the used
compressed air connection.
Fire a test discharge.
The operating pressure is too
low.
Increase operating pressure.
The piston with the driver
does not return to the home
position after the driving-in
action.
Notify customer service.
The triggering action is not
completed.
Notify customer service.
The driver is bent.
Notify customer service.
The reloading
cycle is
interrupted.
Passage of the throttle valves
has changed.
Notify customer service.
Fastener has become wedged
during reloading.
Disconnect stapler from the compressed air
supply.
Remove fasteners from reloading opening.
Load new fasteners and fire a test
discharge.
Other malfunctions
If other malfunctions of the stapler have occurred which cannot be remedied by oiling and cleaning
it, you must notify the PREBENA service team.
➢ Do not carry out any repair work on the stapler.
➢ Make sure that all malfunctions of the stapler are remedied by the PREBENA service team.
Bekijk gratis de handleiding van Prebena MODUL 11-L64, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Prebena |
| Model | MODUL 11-L64 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5676 MB |
