Prebena 7XR-RK90 handleiding
Handleiding
Je bekijkt pagina 23 van 60
23
1.7 Triggering Systems
Depending upon the use, the tackers can be equipped with differ-
ent triggering systems.
Single-Fire Trigger: In this triggering procedure, the trigger must
be activated once each time a fastener is ejected. The trigger must
be fully released before a new fastener can be driven in.
Single-Fire Trigger with Trigger Safety (preferred method of use): In this
triggering procedure, the trigger and the trigger safety must be activated before
a fastener can be ejected. This means that when the trigger is pulled, a fasten-
er is ejected only when the tacker muzzle is pushed against the point where the
fastener is to be driven. Further fasteners can only be driven after the trigger
has been fully released.
Single-Fire Trigger with Safety Sequence: In this triggering procedure, the
trigger and the trigger safety must be activated before a fastener can be eject-
ed. This means that when the trigger is pulled, a fastener is ejected only after
the tacker muzzle has been pushed against the point where the fastener is to
be driven. Further fasteners can only be driven after the trigger and the trigger
safety have been fully released.
Contact Trigger (for restricted uses): In this triggering proce-
dure, the trigger and the trigger safety must be activated before a
fastener can be ejected, but the order in which this takes place is
not important. To drive in further fasteners, all you have to do is
release the trigger safety while keeping the trigger held down, or
vice versa.
The contact trigger may not be used:
– when moving from one work point to the next for example over stairs, ladders
or scaffolding.
– when sealing boxes or crates.
– when attaching safeties for transport.
Rapid-fire Trigger: In this triggering procedure, fasteners are
ejected as long as the trigger is held down.
Rapid-fire Trigger with Trigger Safety (for restricted uses): In
this triggering procedure, the trigger and the trigger safety must be
activated before a fastener can be ejected. This means that when the trigger is
pulled, a fastener is ejected only after the tacker muzzle has been pushed
against the point where the fastener is to be driven, but the tacker fires contin-
PREBENA-Pneumatic staplers and nailers
ENGLISH
Bekijk gratis de handleiding van Prebena 7XR-RK90, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Prebena |
| Model | 7XR-RK90 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5198 MB |
