Prebena 1GP-XA16 handleiding
Handleiding
Je bekijkt pagina 58 van 226
Operating the tacker
21
The driving depth of the fasteners depends on the hardness and
thickness of the wooden workpiece and the set operating pressure.
Ensure that there are no persons behind the workpiece.
Then check the operation of the tacker at a low operating
pressure by triggering it once.
Regulate the operating pressure according to the resistance of
the wood used.
The correct operating pressure is set when the desired driving depth
of the fasteners is achieved at the lowest possible pressure.
Triggering the tacker
To trigger the tacker once, proceed as follows:
Place the tool lug of the tacker on the wooden workpiece.
Press the trigger (9).
A fastener is driven into the wood.
Release the trigger.
Lift the tacker off the wooden workpiece.
Repeat these steps to drive in further fasteners.
Bekijk gratis de handleiding van Prebena 1GP-XA16, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Prebena |
| Model | 1GP-XA16 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18585 MB |
