Prebena 1GP-XA16 handleiding
Handleiding
Je bekijkt pagina 56 van 226
Operating the tacker
19
Operating the tacker
Regulating the driving depth via operating pressure
The driving depth of the fastener in the material can be set by
regulating the operating pressure. At a high operating pressure, the
fasteners are driven in deeper and not so deep at a lower operating
pressure.
Adjust the operating pressure so that the desired driving depth
is just reached. This offers the following advantages:
You save energy (compressed air),
You reduce the noise level, and
You reduce the wear on the tacker.
To adjust the operating pressure, proceed as follows:
Hold the tacker so that the tool lug faces down.
Adjust the pressure at the pressure regulator of the compressor.
Observe the pressure display of the compressor.
Check driving depth
Press the tool lug onto a sample wooden workpiece with the
same properties as the material to be worked on.
Check the setting by triggering once on the sample material.
Repeat these steps until the desired driving depth is set.
Bekijk gratis de handleiding van Prebena 1GP-XA16, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Prebena |
| Model | 1GP-XA16 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18585 MB |
