Prebena 1GP-ALK35 handleiding
Handleiding
Je bekijkt pagina 67 van 232
Faults
29
Overview of faults
The following overview lists possible faults and the necessary
measures.
Symptom
Possible cause
Corrective measure
The tacker is losing air.
The fastening screws
are loose.
Tighten the fastening
screws.
A seal is defective.
Notify customer services
(see page 35).
Fasteners are not driven
in completely.
The operating
pressure is too low.
Increase the operating
pressure.
The driver tip on the
tacker is worn.
Notify customer services
(see page 35).
Triggering is not
possible.
The operating
pressure is too low.
Increase the operating
pressure of the
compressed air system
to the maximum
permissible level (see
page 15).
Then actuate the trigger
several times.
Moving parts are stuck
together with lubricant
following a long
storage period.
Clean the tacker and oil it
again.
Set the maximum
operating pressure.
Then actuate the trigger
several times.
After triggering, set the
desired operating
pressure.
Otherwise notify
customer services (see
page 35).
Triggering without a
fastener being driven in
The magazine is
contaminated.
Clean the magazine.
Bekijk gratis de handleiding van Prebena 1GP-ALK35, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Prebena |
| Model | 1GP-ALK35 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17239 MB |
