Prebena 1A-AZ25BNH handleiding
Handleiding
Je bekijkt pagina 116 van 144
After operation
46
After operation
After operation, or in case of longer interruptions in operation,
perform the following steps.
Disconnect the air supply
Remove compressed air hose
Pull the quick-connect on the compressed air hose away from the
plug nipple.
The quick-connect is now unlocked.
Pull the compressed air hose off of the tacker connector.
The compressed air in the tacker escapes audibly.
Empty the magazine
Remove the unused fasteners from the magazine when you are no
longer using the tacker.
To do so, proceed as follows:
WARNING
Accidentally triggering when emptying the
magazine can cause severe or fatal injury.
Disconnect the tacker from the
compressed air supply (see page Fehler!
Textmarke nicht definiert.).
Open the magazine (see page 26).
Slide the fasteners (5) remaining in the magazine back out of the
inlet.
Remove the fasteners remaining in the magazine (2).
Bekijk gratis de handleiding van Prebena 1A-AZ25BNH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Prebena |
| Model | 1A-AZ25BNH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12657 MB |
