Prebena 1A-AZ25BNH handleiding
Handleiding
Je bekijkt pagina 106 van 144
Tacker operation 4C-WZ38BNH / 4C-WZ38BNH400
36
WARNING
Accidentally triggering when selecting the
carton thickness can cause severe or fatal
injury.
Do not point the tacker at yourself, people
or animals.
To select the carton thickness, proceed as follows:
Carton thicknesses are marked on the clip on the unit (10).
Open the clamp lever (8) by rotating the lever counterclockwise.
Remove the retaining ring (2) on the locking pin (7).
Pull out the locking pin (7).
Set the two clips (3) so that the holes (9) in the clip (3) align with
the hole in the spacer (4) below the desired carton thickness.
Insert the locking pin (7) through the aligned holes (9) and install
the retaining ring (2) on the locking pin (7).
Close the clamp lever (8) by rotating the lever clockwise.
The desired carton thickness is now set.
Carton thickness is set to 30 mm when the holes on the left
are aligned. The center holes are for 20 mm and the holes on
the right are aligned for carton thickness of 16 mm.
Bekijk gratis de handleiding van Prebena 1A-AZ25BNH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Prebena |
| Model | 1A-AZ25BNH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12657 MB |
