Practixx PX-CS15T handleiding
Handleiding
Je bekijkt pagina 51 van 76
w ww.practixx.com
GB
|
51
17. Troubleshooting
The following table shows fault symptoms and describes remedial measures in the event of your machine failing to
work properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault Possible cause Remedy
The motor (17) ends
the splitting process
automatically.
Overvoltage protective device was
triggered.
Call a qualied electrician.
Log is not split.
Log splitter loaded incorrectly. Insert the log correctly.
Splitting wedge (3) is blunt. Grind the splitting wedge (3).
Oil leaks. Locate the leak, contact the dealer.
Splitting column (2)
vibrates, makes noise.
Low oil and excess air in the hydraulic
system.
Check the oil level, top up if necessary,
otherwise contact the dealer.
Hydraulic pump whistles.
Too little hydraulic oil in the hydraulic oil
tank (14).
Top up hydraulic oil.
Oil leak at splitting column
(2) or other places.
Trapped air in the hydraulic system
during operation.
Loosen the bleed screw (15) two turns
before use.
Bleed screw (15) not tightened before
transport.
Tighten bleed screw (15) before transport.
Oil drain screw (33) loose. Tighten the oil drain screw (33) rmly.
Oil valve and/or seals defective. Contact dealer.
Bekijk gratis de handleiding van Practixx PX-CS15T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Practixx |
| Model | PX-CS15T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10629 MB |
