Practixx PX-CS15T handleiding
Handleiding
Je bekijkt pagina 41 van 76
w ww.practixx.com
GB
|
41
7. Technical data
Dimensions DxWxH mm 1160x960x1100 / 1650
Swivel table height mm 320
Working height mm 920
Min./max. wood length
cm
75 / 107
Max. power t* 15
Hydraulic pressure MPa 26,7
Cylinder stroke cm 55,0
Feed speed cm/s 3,8
Return speed cm/s 12,8
Oil quantity l 7
Min./max. wood diameter
cm
12 – 45
Weight kg 191
Drive
Motor V/Hz 400/50
Rated input P1 kW 3,5
Power output P2 kW 2,5
Input current A 7,1
Short-circuit resistance
kA
1
Operating mode S6/40% / IP54
Speed 1/min 2800
Motor protection Yes
Phase inverter Yes
Subject to technical changes!
* The maximum achievable splitting force is dependent
on the resistance of the log and can differ due to varia-
ble contributing factors on the hydraulic system.
** Operating mode S6 40%, uninterrupted periodic op-
eration with intermittent load. The mode comprises of
a start-up period, a time with constant load and an idle
time. The operating time is 10 mins, the relative duty
cycle is 40% of the operating time.
Noise
The noise levels have been determined in accordance
with EN 62841.
6. Additional safety instructions
• The log splitter may only be operated by a single
person.
• Never split trunks that contain nails, wire, or other
objects.
• Wood that has already been split and wood chip-
pings create a hazardous work area. There is a
danger of tripping, slipping or falling. Always keep
the work area orderly.
• Never place your hands on moving parts of the ma-
chine when it is switched on.
• Only split wood with a maximum length of 107 cm.
m Warning! This power tool generates an electro-
magnetic eld during operation. This eld can impair
active or passive medical implants under certain cir-
cumstances. In order to prevent the risk of serious
or deadly injuries, we recommend that persons with
medical implants consult with their physician and the
manufacturer of the medical implant prior to operating
the power tool.
Residual risks
The machine has been built according to the state-of-
the-art and the recognised technical safety require-
ments. However, individual residual risks can arise
during operation.
• Danger of injury for ngers and hands from the split-
ting tool in the event of improper guiding or support
of the wood.
• Injuries due to the workpiece being ejected at high
speed due to improper holding or guiding.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Switch off the device and pull out the mains plug be-
fore carrying out any setting or maintenance work.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re-
main.
• Residual risks can be minimised if the “Safety In-
structions” and the “Intended Use” together with the
operating manual as a whole are observed.
• Avoid accidental starting of the machine: the oper-
ating button may not be pressed when inserting the
plug in an outlet. Use the tool that is recommended
in this operating manual.
• This is how to ensure that your machine provides
optimum performance.
• Keep your hands away from the working area when
the machine is in operation.
Bekijk gratis de handleiding van Practixx PX-CS15T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Practixx |
| Model | PX-CS15T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10629 MB |
