Practixx PX-BTS-450 handleiding
Handleiding
Je bekijkt pagina 26 van 44
w ww.practixx.com
26
|
GB
16. Troubleshooting
The following table shows fault symptoms and describes remedial measures in the event of your machine failing to work
properly. If you cannot localise and rectify the problem with this, please contact your service workshop.
Fault Possible cause Remedy
Motor does not start
Damaged on/o switch.
Replace all damaged parts before using the
grinding machine again.
Damaged on/o switch line.
Damaged on/o switch relay.
Fuse burnt
Motor burnt
Contact your local service centre or an author-
ised service station. Every attempt to carry out
a repair, can be dangerous if it is not done by
skilled personnel.
Machine becomes slower
during work.
Too much pressure is applied to the
workpiece.
Apply less pressure to the workpiece.
Grinding belt runs up from
the drive pulley.
Grinding belt does not run on track. Reset the track.
Wood gets burnt during
sanding.
Sanding disc or belt is covered with
grease.
Replace the grinding belt or grinding disc.
Excessive pressure was applied to the
workpiece.
Reduce the pressure applied to the workpiece
Bekijk gratis de handleiding van Practixx PX-BTS-450, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Practixx |
| Model | PX-BTS-450 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8286 MB |
