PowerWalker VI 1500 RT HID handleiding
Handleiding
Je bekijkt pagina 36 van 37
35
EN
8. Trouble Shooting
8.1 Audible Alarm Trouble Shooting
Indication
Cause
Solution
Sounding every 4
seconds
The UPS is on battery
mode
Check the input voltage
Sounding every
Second and “bATL”
on screen
The battery voltage is
low
Save your work and turn off your
equipment
Sounding every
second and “OVLD”
on screen
Output overload
Check load level indicator and
remove some load
Continuously
sounding and red
display
The UPS fails Please contact your local dealer
8.2 General Trouble Shooting
Problem
Cause
Solution
The UPS can't be turned
on when power switch is
pressed
Internal fuse may be
broken
Please contact your local dealer
UPS is on and no power
to load
Output Jumpers is not
connected correctly
Check output Jumpers
No power on output
receptacle
Check if the LS1 and LS2 are set up
from "001 to 000".
Backup time is short
Battery is empty
Re-charge the battery at least 24 hours
Battery aging
Replace Battery
Continuously sounding
and display turn to red
The UPS fails Please contact your local dealer
Buttons does not work
The setting mode is not
a right path
Please see right configuring method
Button is Broken
Please contact your local dealer
Bekijk gratis de handleiding van PowerWalker VI 1500 RT HID, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PowerWalker |
| Model | VI 1500 RT HID |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2727 MB |
