PowerWalker VFI 1000R/1U handleiding
Handleiding
Je bekijkt pagina 7 van 12
5
EN
Step 4: Disable/Enable ROO/RPO function
Contact open: UPS shuts down.
Contact closed: UPS start-up (UPS is connected to AC
power and AC power is available).
Note: The local ON/OFF control by pressing On/Off
button overrides the remote-control function.
Contact open: UPS shuts down and Fault LED (3) will
be ON.
To return to normal operation, de-activate external
remote contact (Fault LED (3) will be OFF) and restart
the UPS by pressing button.
Step 5: Turn on/off the UPS
Press the ON/OFF button on the front panel for two seconds to power on the UPS.
Step 6: Install software
For optimal computer system protection, install UPS monitoring software to fully configure UPS
shutdown. You may insert provided CD into CD-ROM to install the monitoring software. If not,
please follow steps below to download and install monitoring software from the internet:
1. Go to the website http://www.power-software-download.com
2. Click ViewPower software icon and then choose your required OS to download the software.
3. Follow the on-screen instructions to install the software.
4. When your computer restarts, the monitoring software will appear as an orange plug icon
located in the system tray, near the clock.
Bekijk gratis de handleiding van PowerWalker VFI 1000R/1U, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PowerWalker |
| Model | VFI 1000R/1U |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1947 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 12600 g |
| Breedte | 477 mm |
| Diepte | 438 mm |
| Hoogte | 44 mm |
