PowerWalker VFI 1000 LICR IoT handleiding

Niet gecategoriseerd

PowerWalker

36 pagina's

PDF beschikbaar

Handleiding

3.3 Install the Unit

Always keep 200 mm of free space behind the UPS rear panel.

Check that the indicaons on the name plate located on the top cover of the UPS meets to

the AC-power source and the true electrical consumpon of the total load.

1. Connect the UPS input

socket to the AC-power source

using the cable of the protected

equipment.

2. Connect the loads to the

UPS using the cables.

Note: The UPS charges the baery as soon as it is connected to the AC-power source, even

if buon is not pressed.

Once the UPS is connected to the AC-power source, 8 hours of charging are required before

the baery can supply the rated backup me.

When the cables connected to terminal block, the inner copper wire must not be exposed

to avoid the risk of electric shock.

 Rack installaon

Follow steps 1 to 4 for module mounng on the rails.

Bekijk gratis de handleiding van PowerWalker VFI 1000 LICR IoT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.