PowerWalker Solar Inverter 5000 ZRO Handleiding (84 Pagina's)

Handleiding

41

PARALLEL FUNCTION

1. Introduction

This inverter can be used in parallel for two applications.

1. Parallel operation in single phase with up to 9 units. For 5KW model, the supported maximum output

power is 45KW/45KVA. For 6KW model, the supported maximum output power is 54KW/54KVA.

2. Maximum 9 units work together to support three-phase equipment. Seven units support one phase

maximum. For 5KW model, the supported maximum output power is 45KW/45KVA and one phase can be

up to 35KW/35KVA. For 6KW model, the supported maximum output power is 54KW/54KVA and one phase

can be up to 42KW/42KVA.

NOTE: If this unit is bundled with share current cable and parallel cable, this inverter is default supported

parallel operation. You may skip section 3. If not, please purchase parallel kit and install this unit by following

instruction from professional technical personnel in local dealer.

2. Package Contents

In parallel kit, you will find the following items in the package:

Parallel board Parallel communication cable Current sharing cable

3. Parallel board installation

Step 1: Remove bottom case by unscrewing all screws as shown below.

Step 2: Remove two screws as below chart and remove 2-pin and 14-pin cables.

Bekijk gratis de handleiding van PowerWalker Solar Inverter 5000 ZRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.