PowerWalker Solar Inverter 5000 ZRO Handleiding (84 Pagina's)

Handleiding

24

98

Time setting– Month

For month setting, the range is

from 01 to 12.

99

Time setting – Year

For year setting, the range is

from 17 to 99.

USB Function Setting

Please insert USB disk into USB port ( ). Press and hold “ ” button for 3 seconds to enter USB function

setting mode. These functions include to upgrade inverter firmware, export data log and re-write internal

parameters from USB disk.

Procedure LCD Screen

Step 1: Press and hold “ ” button for 3 seconds to enter USB function setting mode.

Step 2: Press “ ”, “ ” or “ ” button to enter the selectable setting programs.

Step 3: Please select setting program by following the procedure.

Program# Operation Procedure

LCD Screen

:

Upgrade

firmware

This function is to upgrade inverter firmware. If firmware upgrade is needed, please check with

your dealer or installer for detail instructions.

:

Re-write

internal

parameters

This function is to over-write all parameter settings (TEXT file) with settings in the On-The-Go

USB disk from a previous setup or to duplicate inverter settings. Please check with your dealer

or installer for detail instructions.

:

Export data

log

Press “ ” button to export data log from the inverter to USB disk. If the

selected function is ready, LCD will display “ ”. Press “ ” button to

confirm the selection again.

 Press “ ” button to select “Yes”, LED 1 will flash once every second

during the process. It will only display and all LEDs will be on

after this action is complete. Then, press “ ” button to return to

main screen.

 Or press “ ” button to select “No” to return to main screen.

Bekijk gratis de handleiding van PowerWalker Solar Inverter 5000 ZRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.