PowerWalker Solar Inverter 5000 ZRO Handleiding (84 Pagina's)

Handleiding

18

11

Maximum utility charging

current

Note: If setting value in

program 02 is smaller than

that in program in 11, the

inverter will apply charging

current from program 02 for

utility charger.

30A (default for 5KW)

For 5KW model, default setting

is 30A and setting range is 1A,

then from 10A to 100A.

For 6KW model, default setting

is 60A and setting range is 1A,

then from 10A to 120A.

Increment of each click is 10A.

12

Setting voltage point back

to utility source when

selecting “SBU” (SBU

priority) in program 01

Default setting: 46.0V

Setting range is from 44.0V to

57.0V and increment of each

click is 1.0V.

13

Setting voltage point back

to battery mode when

selecting “SBU” (SBU

priority) in program 01

The setting range is from 48.0V to 64.0V and increment of each

click is 1.0V.

Battery fully charged

54.0V (default)

16

Solar energy priority:

To configure solar energy

priority for battery and load

SbL: Solar energy for battery

first

UCB: Allow utility to charge

battery (Default)

Solar energy charges battery

first and allow the utility to

charge battery.

SbL: Solar energy for battery

first

UdC: Disallow utility to charge

battery

Solar energy charge battery first

and disallow the utility to charge

battery.

Bekijk gratis de handleiding van PowerWalker Solar Inverter 5000 ZRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.