PowerWalker Solar Inverter 3600 SKY handleiding

Niet gecategoriseerd

PowerWalker

75 pagina's

PDF beschikbaar

Handleiding

Battery Connection

CAUTION: For safety operation and regulation compliance, it’s requested to install a separate DC over-current

protector or disconnect device between battery and inverter. It may not be requested to have a disconnect

device in some applications, however, it’s still requested to have over-current protection installed. Please refer

to typical amperage in below table as required fuse or breaker size.

WARNING! All wiring must be performed by qualified personnel.

WARNING! It's very important for system safety and efficient operation to use

appropriate cable for battery connection. To reduce risk of injury, please use the

proper recommended cable and terminal size as below.

Rec

ommended battery cable and terminal size:

Model Typical

Amperage

Battery

Capacity

Wire Size

Ring Terminal

Torque

Value

Cable

Dimensions

D (mm)

L (mm)

3.6KW 100A 200AH

1*4AWG 22 6.4 33.5 2~3 Nm

5.6KW

137A 200AH

1*2AWG or 2*6AWG 28 6.4 42.7 2~3 Nm

Ple

ase follow below steps to implement battery connection:

1. Assemble battery ring terminal based on recommended battery cable and terminal size.

2. Insert the ring terminal of battery cable flatly into battery connector of inverter and make sure the nuts are

tightened with torque of 2-3 Nm. Make sure polarity at both the battery and the inverter/charge is correctly

connected and ring terminals are tightly screwed to the battery terminals.

WARNING: Shock Hazard

Installation must be performed with care due to high battery voltage in series.

CAUTION!! Do not place anything between the flat part of the inverter terminal and the ring

terminal. Otherwise, overheating may occur.

CAUTION!! Do not apply antioxidant substance on the terminals before terminals are connected

tightly.

CAUTION!! Before making the final DC connection or closing DC breaker/disconnector, be sure

positive (+) must be connected to positive (+) and negative (-) must be connected to negative

(-).

Ring terminal:

Bekijk gratis de handleiding van PowerWalker Solar Inverter 3600 SKY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.