PowerWalker Solar Inverter 3600 SKY handleiding

75 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 28 van 75
26
USB Function Setting
Follow below steps to upgrade firmware.
Procedure
LCD Screen
Step 1: Insert an USB disk into the USB port (N in product overview). Press and
hold ” button for 3 seconds to enter USB Function Setting Mode. It will show
” on the top right corner and “ in LCD.
Step 2: Press “ ” button to read the file from the USB disk. If there is no burning file, the LCD will alert
"U01". Otherwise it will enter the next step.
Step 3:
Press “ button choose yesto start the firmware upgrade.
Or press or button to return to main screen.
Step 4: If “yes” is select, it will start the firmware upgrade. The LCD will display
and complete progress in percentage on the right. represents 88%
completion progress. Once 100% is complete, press button to return to
main screen.
If no button is pressed for 1 minute, it will automatically return to main screen.
Error message for USB On-the-Go functions:
Error Code Messages
No USB disk is detected.
USB disk is protected from copy.
Document inside the USB disk with wrong format.
If any error occurs, error code will only show 3 seconds. After 3 seconds, it will automatically return to
display screen.

Bekijk gratis de handleiding van PowerWalker Solar Inverter 3600 SKY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkPowerWalker
ModelSolar Inverter 3600 SKY
CategorieNiet gecategoriseerd
TaalNederlands
Grootte9154 MB