PowerWalker MDC 6K42UW C handleiding
Handleiding
Je bekijkt pagina 10 van 138
2
Safety precautions
•
When maintaining or replacing components, pay attention to high-temperature components (such
as the compressor, refrigerant pipe, and electric heater) to prevent scalds and to prevent the
refrigerant system from being cracked or exploded due to misoperations.
•
Refrigerant leakage may cause frostbite. Take protective measures (for example, wear antifreeze
gloves) when handling refrigerant.
Installation environment requirements
Pay attention to the following when working at least 2 meters above the ground:
•
Comply with local laws and regulations.
•
The operator must be trained and qualified.
•
Before working at heights, check the climbing tools and safety gears such as safety helmets,
safety belts, ladders, springboards, scaffolding, and lifting equipment. If they do not meet the
requirements, take corrective measures or disallow working at heights.
•
Wear personal protective equipment such as the safety helmet and safety belt or waist rope and
fasten it to a solid structure. Do not mount it on an insecure moveable object or metal object with
sharp edges. Make sure that the hooks will not slide off.
•
Set a restricted area and eye-catching signs for working at heights to warn away irrelevant
personnel.
•
Carry the operation machinery and tools properly to prevent them from falling off and causing
injuries.
•
Personnel involving working at heights are not allowed to throw objects from the height to the
ground, or vice versa. Objects should be transported by tough slings, hanging baskets, highline
trolleys, or cranes.
•
Ensure that guard rails and warning signs are set at the edges and openings of the area
involving working at heights to prevent falls.
•
Do not pile up scaffolding, springboards, or other sundries on the ground under the area
involving working at heights. Do not allow people to stay or pass under the area involving
working at heights.
•
Inspect the scaffolding, springboards, and workbenches used for working at heights in advance
to ensure that their structures are solid and not overloaded.
•
Any violations must be promptly pointed out by the site manager or safety supervisor and the
involved personnel should be prompted for correction. Personnel who fail to stop violations will
be forbidden from working.
Potential risks
•
Operate the product only after disconnecting it from all power sources.
•
Before opening internal components for maintenance, disconnect the mains switch and all power
supplies to the UPS.
Bekijk gratis de handleiding van PowerWalker MDC 6K42UW C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PowerWalker |
| Model | MDC 6K42UW C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 22093 MB |
