PowerWalker LiFe Battery System 102-37 handleiding

Niet gecategoriseerd

PowerWalker

50 pagina's

PDF beschikbaar

Handleiding

~ 36 ~

Definition of RS485 + I/O port and CAN + 12V port

RS485 + I/O port：

PIN1: RS485_A1: Noninverting Driver Output/Receiver Input.

PIN2: RS485_B1: Inverting Driver Output/Receiver Input.

PIN3: GND of RS-485

PIN4: Inactive pin of Dry contact signal.

PIN5: Active pin of Dry contact signal.

PIN6: Common pin of dry contact

PIN7: RS485_A2: Noninverting Driver Output/Receiver Input.

PIN8: RS485_B2: Inverting Driver Output/Receiver Input.

CAN + 12V port

PIN1 & PIN2: System12V positive input.

PIN3: GND of CAN for communication among control boxes

and system.

PIN4: CAN_H for communication among control box and

system.

PIN5: CAN_L for communication among control box and

system.

PIN6: NC

PIN7 & PIN8: System 12V negative input.

Table 9 Pins definition of communication port

NOTICE

• The communication cable inserted into the RS485 port or CAN port should be decided by the

compatible communication port of the

inverter. Just select one of them to install the

communication cable. Please use CAN port when connecting to PowerWalker Solar Inverter

SAN 5k/ 6k/8k/10k 3/3.

• See the above definition to check each pin output.

CAUTION

Risk of injury due to short circuit of battery module:

Injuries may result if the battery module is short-circuited due to the use of power cables or conductors to

short between output ports B+ and B- of the battery module, need to take careful during connection.

Risk of injury due to electric shock during connecting cables;

Wear suitable personal protective equipment for all work on the battery system.

Bekijk gratis de handleiding van PowerWalker LiFe Battery System 102-37, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.