Handleiding
Je bekijkt pagina 8 van 37
8
O
BM-N/L/R Ser
i
es
Pro
f
essional Video Monito
r
Outstan
d
ing Picture Qua
l
it
y
(OBM-L180/R210)
[UP] Buon
- When the menu is displayed, press the buon to select a menu item or increase the value.
[DOWN] Buon
- Press the buon to select the Aspect Rao of the signal.
- When the menu is displayed, press the buon to select a menu item or decrease the value.
[ENTER] Buon
- Used to confirm the seng.
- If this knob is pressed when the menu is not displayed, the adjustment screen of [VOLUME] is displayed to
adjust the audio volume.
- Press this knob to change the modes in the order of [Focus Frequency], [Zebra Level], [Line Posion],
[Variable Marker] and adjust each mode’s value.
[Focus Frequency]: When Focus Assist funcon is acvated, this mode is displayed.
[Zebra Level]: When Zebra funcon is acvated, this mode is displayed.
[Line Posion]: When WFM/Vector funcon and Line Select funcon is acvated, this mode is displayed.
[Variable Marker]: When Marker funcon is acvated and Aspect Marker is set Variable, this mode is
displayed.
F : (Standby) Switch and Indicator
- Press to turn the power on when this monitor is in standby mode. Aer being turned on, the monitor
performs inializaon and the indicator flashes in green.
- Press the switch again for a second to set the monitor in standby mode. Then, the indicator flashes in
orange and then turns red. The indicator in orange means that the monitor goes into the standby
mode.
When the indicator flashes in orange, this buon doesn’t work.
G : (headphone) Jack and USB connector
Headphone Jack
- The audio signal which is selected using the input select buon is output in stereo sound.
- When SDI signals are input, the audio signals of the channels selected with SDI Audio Seng in the User
Configuraon menu are output.
- When the headphone is connected to the headphone jack, audio signals will not be output from speskers.
[USB] Connector
- To update CPU, GPU, FPGA program.
- To connect the monitor with the Color Calibraon program provided by the manufacturer and perform
the color calibraon.
- To connect the monitor with the control program provided by the manufacturer and control funcons
remotely.
- To impot the custom 3D LUT file(*.cube, 32^³, 33^³, 64^³ and 65^³).
H : IR Receiver (OBM-R210/N420/N460/N550)
- Receives signals from the remote control.
Bekijk gratis de handleiding van Postium OBM-N240G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Postium |
| Model | OBM-N240G |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 14165 MB |
