Posiflex PP-8800 handleiding
Handleiding
Je bekijkt pagina 7 van 21
Part 7
QUICK START-UP
LOADING PAPER
Desk Top Application
1. Remove the spill protect cover if the option is on.
2. Press down the hood release button to release the top hood as in Pix. 1.
3. Raise the released hood wide open manually as in Pix. 2.
4. Drop the thermal paper roll inside the printer in orientation.
5. Close the hood back leaving the tail of the paper roll coming out of the
opening between the hood and the top cover as in Pix. 3.
6. Excessive paper will cut automatically when change the paper at power
on status.
7. Apply the spill protect cover while having the paper to come out of the
paper exit slot of the cover if this option is used.
When to Replace Paper
Whenever the printer gives paper out signal or a red line appears on the
thermal paper, it is the proper timing for replacing the paper. Do not wait till
the print engine is dragging the paper roll at the very end. Remove the leftover
and replace a new paper roll as illustrated above to prevent excessive paper
dust in the printer and consequently possibility for paper jam.
CONNECTING CABLES
USB Connection
The USB connector on PP-8800/8800E is a type
B USB connector at lower right position below
the serial port. Use the normal USB Cable as in
the left picture to connect the type A end to a
normal USB port of host system. Please visit our
web site http://www.posiflex.com or
http://www.posiflex.com.tw for detailed
information of the USB driver installation if required. Please note that for PP-
Release Button
Pix. 1
Pix. 2
Pix. 3
Type A
Normal USB Plugs
Type B
Bekijk gratis de handleiding van Posiflex PP-8800, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Posiflex |
| Model | PP-8800 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3150 MB |
